Kernel-3.10.0-957.el7_mpic-msgr

• FSL MPIC Message Registers

This binding specifies what properties must be available in the device tree
representation of the message register blocks found in some FSL MPIC
implementations.

Required properties:

- compatible: Specifies the compatibility list for the message register
  block.  The type shall be <string-list> and the value shall be of the form
  "fsl,mpic-v<version>-msgr", where <version> is the version number of
  the MPIC containing the message registers.

- reg: Specifies the base physical address(s) and size(s) of the
  message register block's addressable register space.  The type shall be
  <prop-encoded-array>.

- interrupts: Specifies a list of interrupt-specifiers which are available
  for receiving interrupts. Interrupt-specifier consists of two cells: first
  cell is interrupt-number and second cell is level-sense. The type shall be
  <prop-encoded-array>.

Optional properties:

- mpic-msgr-receive-mask: Specifies what registers in the containing block
  are allowed to receive interrupts. The value is a bit mask where a set
  bit at bit 'n' indicates that message register 'n' can receive interrupts.
  Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
  be <u32>. If not present, then all of the message registers in the block
  are available.

Aliases:

An alias should be created for every message register block.  They are not
required, though.  However, a particular implementation of this binding
may require aliases to be present.  Aliases are of the form
'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
Numbers shall start at 0.

Example:

aliases {
    mpic-msgr-block0 = &mpic_msgr_block0;
    mpic-msgr-block1 = &mpic_msgr_block1;
};

mpic_msgr_block0: mpic-msgr-block@41400 {
    compatible = "fsl,mpic-v3.1-msgr";
    reg = <0x41400 0x200>;
    // Message registers 0 and 2 in this block can receive interrupts on
    // sources 0xb0 and 0xb2, respectively.
    interrupts = <0xb0 2 0xb2 2>;
    mpic-msgr-receive-mask = <0x5>;
};

mpic_msgr_block1: mpic-msgr-block@42400 {
    compatible = "fsl,mpic-v3.1-msgr";
    reg = <0x42400 0x200>;
    // Message registers 0 and 2 in this block can receive interrupts on
    // sources 0xb4 and 0xb6, respectively.
    interrupts = <0xb4 2 0xb6 2>;
    mpic-msgr-receive-mask = <0x5>;
};