Kernel-2.6.32-573.12.1.el6_phy

PHY nodes

Required properties:

• device_type : Should be “ethernet-phy”
• interrupts : where a is the interrupt number and b is a
  field that represents an encoding of the sense and level
  information for the interrupt. This should be encoded based on
  the information in section 2) depending on the type of interrupt
  controller you have.
• interrupt-parent : the phandle for the interrupt controller that
  services interrupts for this device.
• reg : The ID number for the phy, usually a small integer
• linux,phandle : phandle for this node; likely referenced by an
  ethernet controller node.

Example:

ethernet-phy@0 {
linux,phandle = <2452000>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <0>;
device_type = “ethernet-phy”;
};