Kernel-4.18.0-80.el8_ti,cdce706

Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
synthesizer/multiplier/divider.

Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf

I2C device node required properties:

• compatible: shall be “ti,cdce706”.
• reg: i2c device address, shall be in range [0x68…0x6b].
• #clock-cells: from common clock binding; shall be set to 1.
• clocks: from common clock binding; list of parent clock
  handles, shall be reference clock(s) connected to CLK_IN0
  and CLK_IN1 pins.
• clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
  in case of crystal oscillator or differential signal input
  configuration. Use clk_in0 and clk_in1 in case of independent
  single-ended LVCMOS inputs configuration.

Example:

clocks {
    clk54: clk54 {
        #clock-cells = <0>;
        compatible = "fixed-clock";
        clock-frequency = <54000000>;
    };
};
...
i2c0: i2c-master@d090000 {
    ...
    cdce706: clock-synth@69 {
        compatible = "ti,cdce706";
        #clock-cells = <1>;
        reg = <0x69>;
        clocks = <&clk54>;
        clock-names = "clk_in0";
    };
};
...
simple-audio-card,codec {
    ...
    clocks = <&cdce706 4>;
};