Kernel-4.18.0-80.el8_qcom-apq8064-sata-phy

Qualcomm APQ8064 SATA PHY Controller

SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
Each SATA PHY controller should have its own node.

Required properties:

• compatible: compatible list, contains “qcom,apq8064-sata-phy”.
• reg: offset and length of the SATA PHY register set;
• #phy-cells: must be zero
• clocks: a list of phandles and clock-specifier pairs, one for each entry in
  clock-names.
• clock-names: must be “cfg” for phy config clock.

Example:
sata_phy: sata-phy@1b400000 {
compatible = “qcom,apq8064-sata-phy”;
reg = <0x1b400000 0x200>;

    clocks = <&gcc SATA_PHY_CFG_CLK>;
    clock-names = "cfg";

    #phy-cells = <0>;
};