Binding for Qualcomm PM8941 WLED driver
Required properties:
- compatible: should be “qcom,pm8941-wled”
- reg: slave address
Optional properties:
- default-brightness: brightness value on boot, value from: 0-4095
default: 2048 - label: The name of the backlight device
- qcom,cs-out: bool; enable current sink output
- qcom,cabc: bool; enable content adaptive backlight control
- qcom,ext-gen: bool; use externally generated modulator signal to dim
- qcom,current-limit: mA; per-string current limit; value from 0 to 25
default: 20mA - qcom,current-boost-limit: mA; boost current limit; one of:
105, 385, 525, 805, 980, 1260, 1400, 1680
default: 805mA - qcom,switching-freq: kHz; switching frequency; one of:
600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371,
1600, 1920, 2400, 3200, 4800, 9600,
default: 1600kHz - qcom,ovp: V; Over-voltage protection limit; one of:
27, 29, 32, 35
default: 29V - qcom,num-strings: #; number of led strings attached; value from 1 to 3
default: 2
Example:
pm8941-wled@d800 {
compatible = “qcom,pm8941-wled”;
reg = <0xd800>;
label = “backlight”;
qcom,cs-out;
qcom,current-limit = <20>;
qcom,current-boost-limit = <805>;
qcom,switching-freq = <1600>;
qcom,ovp = <29>;
qcom,num-strings = <2>;
};
