Kernel-4.18.0-80.el8_output_format

                 APEI output format
                 ~~~~~~~~~~~~~~~~~~

APEI uses printk as hardware error reporting interface, the output
format is as follow.

:=
APEI generic hardware error status
severity: ,
section: , severity: ,
flags:

fru_id: fru_text: section_type:

* := recoverable | fatal | corrected | info

# := [primary][, containment warning][, reset][, threshold exceeded]\ [, resource not accessible][, latent error]
:= generic processor error | memory error | \ PCIe error | unknown,
:= | | \ |

:=
[processor_type: , ]
[processor_isa: , ]
[error_type:
]
[operation: , ]
[flags:
]
[level: ]
[version_info: ]
[processor_id: ]
[target_address: ]
[requestor_id: ]
[responder_id: ]
[IP: ]

* := IA32/X64 | IA64

* := IA32 | IA64 | X64

# :=
[cache error][, TLB error][, bus error][, micro-architectural error]

* := unknown or generic | data read | data write |
instruction execution

# :=
[restartable][, precise IP][, overflow][, corrected]

:=
[error_status: ]
[physical_address: ]
[physical_address_mask: ]
[node: ]
[card: ]
[module: ]
[bank: ]
[device: ]
[row: ]
[column: ]
[bit_position: ]
[requestor_id: ]
[responder_id: ]
[target_id: ]
[error_type: , ]

* :=
unknown | no error | single-bit ECC | multi-bit ECC |
single-symbol chipkill ECC | multi-symbol chipkill ECC | master abort |
target abort | parity error | watchdog timeout | invalid address |
mirror Broken | memory sparing | scrub corrected error |
scrub uncorrected error

:=
[port_type: , ]
[version: .]
[command: , status: ]
[device_id: ::.
slot:
secondary_bus:
vendor_id: , device_id:
class_code: ]
[serial number: , ]
[bridge: secondary_status: , control: ]
[aer_status: , aer_mask:

[aer_uncor_severity: ]
aer_layer=, aer_agent=
aer_tlp_header: ]

* := PCIe end point | legacy PCI end point |
unknown | unknown | root port | upstream switch port |
downstream switch port | PCIe to PCI/PCI-X bridge |
PCI/PCI-X to PCIe bridge | root complex integrated endpoint device |
root complex event collector

if section severity is fatal or recoverable
# :=
unknown | unknown | unknown | unknown | Data Link Protocol |
unknown | unknown | unknown | unknown | unknown | unknown | unknown |
Poisoned TLP | Flow Control Protocol | Completion Timeout |
Completer Abort | Unexpected Completion | Receiver Overflow |
Malformed TLP | ECRC | Unsupported Request
else
# :=
Receiver Error | unknown | unknown | unknown | unknown | unknown |
Bad TLP | Bad DLLP | RELAY_NUM Rollover | unknown | unknown | unknown |
Replay Timer Timeout | Advisory Non-Fatal
fi

:=
Physical Layer | Data Link Layer | Transaction Layer

:=
Receiver ID | Requester ID | Completer ID | Transmitter ID

Where, [] designate corresponding content is optional

All description with * has the following format:

field: ,

Where value of should be the position of “string” in description. Otherwise, will be “unknown”.

All description with # has the following format:

field:

Where each string in corresponding to one set bit of
. The bit position is the position of “string” in description.

For more detailed explanation of every field, please refer to UEFI
specification version 2.3 or later, section Appendix N: Common
Platform Error Record.