Kernel-4.18.0-80.el8_nvidia,tegra124-ahci

Tegra SoC SATA AHCI controller

Required properties :

• compatible : Must be one of:
  • Tegra124 : “nvidia,tegra124-ahci”
  • Tegra132 : “nvidia,tegra132-ahci”, “nvidia,tegra124-ahci”
  • Tegra210 : “nvidia,tegra210-ahci”
• reg : Should contain 2 entries:
  • AHCI register set (SATA BAR5)
  • SATA register set
• interrupts : Defines the interrupt used by SATA
• clocks : Must contain an entry for each entry in clock-names.
  See ../clocks/clock-bindings.txt for details.
• clock-names : Must include the following entries:
  • sata
  • sata-oob
• resets : Must contain an entry for each entry in reset-names.
  See ../reset/reset.txt for details.
• reset-names : Must include the following entries:
  • sata
  • sata-oob
  • sata-cold
• phys : Must contain an entry for each entry in phy-names.
  See ../phy/phy-bindings.txt for details.
• phy-names : Must include the following entries:
  • For Tegra124 and Tegra132:
    • sata-phy : XUSB PADCTL SATA PHY
• For Tegra124 and Tegra132:
  • hvdd-supply : Defines the SATA HVDD regulator
  • vddio-supply : Defines the SATA VDDIO regulator
  • avdd-supply : Defines the SATA AVDD regulator
  • target-5v-supply : Defines the SATA 5V power regulator
  • target-12v-supply : Defines the SATA 12V power regulator

Optional properties:

• reg :
  • AUX register set
• clock-names :
  • cml1 :
    cml1 clock should be defined here if the PHY driver
    doesn’t manage them. If it does, they should not be.
• phy-names :
  • For T210:
    • sata-phy