Kernel-3.10.0-957.el7_samsung,s3c24xx-irq

Samsung S3C24XX Interrupt Controllers

The S3C24XX SoCs contain a custom set of interrupt controllers providing a
varying number of interrupt sources. The set consists of a main- and sub-
controller and on newer SoCs even a second main controller.

Required properties:

• compatible: Compatible property value should be “samsung,s3c2410-irq”
  for machines before s3c2416 and “samsung,s3c2416-irq” for s3c2416 and later.

• reg: Physical base address of the controller and length of memory mapped
  region.

• interrupt-controller : Identifies the node as an interrupt controller

• #interrupt-cells : Specifies the number of cells needed to encode an
  interrupt source. The value shall be 4 and interrupt descriptor shall
  have the following format:

  <ctrl_num parent_irq ctrl_irq type>
  

  ctrl_num contains the controller to use:

  - 0 ... main controller
  - 1 ... sub controller
  - 2 ... second main controller on s3c2416 and s3c2450
  

  parent_irq contains the parent bit in the main controller and will be

         ignored in main controllers
  

  ctrl_irq contains the interrupt bit of the controller
  type contains the trigger type to use

Example:

interrupt-controller@4a000000 {
    compatible = "samsung,s3c2410-irq";
    reg = <0x4a000000 0x100>;
    interrupt-controller;
    #interrupt-cells=<4>;
};

[...]

serial@50000000 {
    compatible = "samsung,s3c2410-uart";
    reg = <0x50000000 0x4000>;
    interrupt-parent = <&subintc>;
    interrupts = <1 28 0 4>, <1 28 1 4>;
};

rtc@57000000 {
    compatible = "samsung,s3c2410-rtc";
    reg = <0x57000000 0x100>;
    interrupt-parent = <&intc>;
    interrupts = <0 30 0 3>, <0 8 0 3>;
};