Kernel-3.10.0-957.el7_mxsfb

• Freescale MXS LCD Interface (LCDIF)

Required properties:

• compatible: Should be “fsl,-lcdif”. Supported chips include
  imx23 and imx28.
• reg: Address and length of the register set for lcdif
• interrupts: Should contain lcdif interrupts
• display : phandle to display node (see below for details)

• display node

Required properties:

• bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
• bus-width : number of data lines. Could be <8>, <16>, <18> or <24>.

Required sub-node:

• display-timings : Refer to binding doc display-timing.txt for details.

Examples:

lcdif@80030000 {
compatible = “fsl,imx28-lcdif”;
reg = <0x80030000 2000>;
interrupts = <38 86>;

display: display {
    bits-per-pixel = <32>;
    bus-width = <24>;

    display-timings {
        native-mode = <&timing0>;
        timing0: timing0 {
            clock-frequency = <33500000>;
            hactive = <800>;
            vactive = <480>;
            hfront-porch = <164>;
            hback-porch = <89>;
            hsync-len = <10>;
            vback-porch = <23>;
            vfront-porch = <10>;
            vsync-len = <10>;
            hsync-active = <0>;
            vsync-active = <0>;
            de-active = <1>;
            pixelclk-active = <0>;
        };
    };
};

};