Kernel-3.10.0-957.el7_lpc32xx-mic

• NXP LPC32xx Main Interrupt Controller
  (MIC, including SIC1 and SIC2 secondary controllers)

Required properties:

• compatible: Should be “nxp,lpc3220-mic”
• interrupt-controller: Identifies the node as an interrupt controller.
• interrupt-parent: Empty for the interrupt controller itself
• #interrupt-cells: The number of cells to define the interrupts. Should be 2.
  The first cell is the IRQ number
  The second cell is used to specify mode:

  1 = low-to-high edge triggered
  2 = high-to-low edge triggered
  4 = active high level-sensitive
  8 = active low level-sensitive
  Default for internal sources should be set to 4 (active high).
  

• reg: Should contain MIC registers location and length

Examples:
/*
* MIC
*/
mic: interrupt-controller@40008000 {
compatible = “nxp,lpc3220-mic”;
interrupt-controller;
interrupt-parent;
#interrupt-cells = <2>;
reg = <0x40008000 0xC000>;
};

/*
 * ADC
 */
adc@40048000 {
    compatible = "nxp,lpc3220-adc";
    reg = <0x40048000 0x1000>;
    interrupt-parent = <&mic>;
    interrupts = <39 4>;
};