- Freescale MSI interrupt controller
Required properties:
- compatible : compatible list, contains 2 entries,
first is “fsl,CHIP-msi”, where CHIP is the processor(mpc8610, mpc8572,
etc.) and the second is “fsl,mpic-msi” or “fsl,ipic-msi” depending on
the parent type. - reg : should contain the address and the length of the shared message
interrupt register set. - msi-available-ranges: use
style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
optional, without this, all the 256 MSI interrupts can be used. - interrupts : each one of the interrupts here is one entry per 32 MSIs,
and routed to the host interrupt controller. the interrupts should
be set as edge sensitive. - interrupt-parent: the phandle for the interrupt controller
that services interrupts for this device. for 83xx cpu, the interrupts
are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
to MPIC.
Example:
msi@41600 {
compatible = “fsl,mpc8610-msi”, “fsl,mpic-msi”;
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
