Kernel-4.18.0-80.el8_ti,wlcore

TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices

This node provides properties for controlling the wilink wireless device. The
node is expected to be specified as a child node to the SDIO controller that
connects the device to the system.

Required properties:

• compatible: should be one of the following:
  • “ti,wl1271”
  • “ti,wl1273”
  • “ti,wl1281”
  • “ti,wl1283”
  • “ti,wl1285”
  • “ti,wl1801”
  • “ti,wl1805”
  • “ti,wl1807”
  • “ti,wl1831”
  • “ti,wl1835”
  • “ti,wl1837”
• interrupts : specifies attributes for the out-of-band interrupt.

Optional properties:

• interrupt-parent : the phandle for the interrupt controller to which the
  device interrupts are connected.
• ref-clock-frequency : ref clock frequency in Hz
• tcxo-clock-frequency : tcxo clock frequency in Hz

Note: the *-clock-frequency properties assume internal clocks. In case of external
clock, new bindings (for parsing the clock nodes) have to be added.

Example:

&mmc3 {
vmmc-supply = <&wlan_en_reg>;
bus-width = <4>;
cap-power-off-card;
keep-power-in-suspend;

#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
    compatible = "ti,wl1835";
    reg = <2>;
    interrupt-parent = <&gpio0>;
    interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
};

};