Kernel-4.18.0-80.el8_sitronix,st7789v

Sitronix ST7789V RGB panel with SPI control bus

Required properties:

• compatible: “sitronix,st7789v”
• reg: Chip select of the panel on the SPI bus
• reset-gpios: a GPIO phandle for the reset pin
• power-supply: phandle of the regulator that provides the supply voltage

Optional properties:

• backlight: phandle to the backlight used

The generic bindings for the SPI slaves documented in 1 also applies

The device node can contain one ‘port’ child node with one child
‘endpoint’ node, according to the bindings defined in 2. This
node should describe panel’s video bus.

Example:

panel@0 {
compatible = “sitronix,st7789v”;
reg = <0>;
reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
backlight = <&pwm_bl>;
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;

port {
    panel_input: endpoint {
        remote-endpoint = <&tcon0_out_panel>;
    };
};

};