MAX98090 audio CODEC
This device supports I2C only.
Required properties:
compatible : “maxim,max98090” or “maxim,max98091”.
reg : The I2C address of the device.
interrupts : The CODEC’s interrupt output.
Optional properties:
clocks: The phandle of the master clock to the CODEC
clock-names: Should be “mclk”
#sound-dai-cells : should be 0.
maxim,dmic-freq: Frequency at which to clock DMIC
maxim,micbias: Micbias voltage applies to the analog mic, valid voltages value are:
0 - 2.2v
1 - 2.55v
2 - 2.4v
3 - 2.8v
Pins on the device (for linking into audio routes):
- MIC1
- MIC2
- DMICL
- DMICR
- IN1
- IN2
- IN3
- IN4
- IN5
- IN6
- IN12
- IN34
- IN56
- HPL
- HPR
- SPKL
- SPKR
- RCVL
- RCVR
- MICBIAS
Example:
audio-codec@10 {
compatible = “maxim,max98090”;
reg = <0x10>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
};
