Kernel-4.18.0-80.el8_lp87565

TI LP87565 PMIC MFD driver

Required properties:

• compatible: “ti,lp87565”, “ti,lp87565-q1”
• reg: I2C slave address.
• gpio-controller: Marks the device node as a GPIO Controller.
• #gpio-cells: Should be two. The first cell is the pin number and

      the second cell is used to specify flags.
      See ../gpio/gpio.txt for more information.
  

• xxx-in-supply: Phandle to parent supply node of each regulator

      populated under regulators node. xxx should match
      the supply_name populated in driver.
  

  Example:

lp87565_pmic: pmic@60 {
compatible = “ti,lp87565-q1”;
reg = <0x60>;
gpio-controller;
#gpio-cells = <2>;

buck10-in-supply = <&vsys_3v3>;
buck23-in-supply = <&vsys_3v3>;

regulators: regulators {
    buck10_reg: buck10 {
        /* VDD_MPU */
        regulator-name = "buck10";
        regulator-min-microvolt = <850000>;
        regulator-max-microvolt = <1250000>;
        regulator-always-on;
        regulator-boot-on;
    };

    buck23_reg: buck23 {
        /* VDD_GPU */
        regulator-name = "buck23";
        regulator-min-microvolt = <850000>;
        regulator-max-microvolt = <1250000>;
        regulator-boot-on;
        regulator-always-on;
    };
};

};