- Clock bindings for Freescale i.MX5
Required properties:
- compatible: Should be “fsl,
-ccm” , where can be imx51 or imx53 - reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its “clocks” phandle cell. See include/dt-bindings/clock/imx5-clock.h
for the full list of i.MX5 clock IDs.
Examples (for mx53):
clks: ccm@53fd4000{
compatible = “fsl,imx53-ccm”;
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
can1: can@53fc8000 {
compatible = “fsl,imx53-flexcan”, “fsl,p1010-flexcan”;
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = “ipg”, “per”;
};
