Kernel-4.18.0-80.el8_imx-audio-es8328

Freescale i.MX audio complex with ES8328 codec

Required properties:

• compatible : “fsl,imx-audio-es8328”

• model : The user-visible name of this sound complex

• ssi-controller : The phandle of the i.MX SSI controller

• jack-gpio : Optional GPIO for headphone jack

• audio-amp-supply : Power regulator for speaker amps

• audio-codec : The phandle of the ES8328 audio codec

• audio-routing : A list of the connections between audio components.

                 Each entry is a pair of strings, the first being the
         connection's sink, the second being the connection's
         source. Valid names could be power supplies, ES8328
         pins, and the jacks on the board:
  
        Power supplies:
           * audio-amp
  
        ES8328 pins:
           * LOUT1
           * LOUT2
           * ROUT1
           * ROUT2
           * LINPUT1
           * LINPUT2
           * RINPUT1
           * RINPUT2
           * Mic PGA
  
        Board connectors:
           * Headphone
           * Speaker
           * Mic Jack
  

• mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)

• mux-ext-port : The external port of the i.MX audio muxer (AUDMIX)

Note: The AUDMUX port numbering should start at 1, which is consistent with
hardware manual.

Example:

sound {
compatible = “fsl,imx-audio-es8328”;
model = “imx-audio-es8328”;
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
jack-gpio = <&gpio5 15 0>;
audio-amp-supply = <&reg_audio_amp>;
audio-routing =
“Speaker”, “LOUT2”,
“Speaker”, “ROUT2”,
“Speaker”, “audio-amp”,
“Headphone”, “ROUT1”,
“Headphone”, “LOUT1”,
“LINPUT1”, “Mic Jack”,
“RINPUT1”, “Mic Jack”,
“Mic Jack”, “Mic Bias”;
mux-int-port = <1>;
mux-ext-port = <3>;
};