Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan
Required properties:
- compatible: “holtek,ht16k33”
- reg: I2C slave address of the chip.
- interrupt-parent: A phandle pointing to the interrupt controller
serving the interrupt for this chip. - interrupts: Interrupt specification for the key pressed interrupt.
- refresh-rate-hz: Display update interval in HZ.
- debounce-delay-ms: Debouncing interval time in milliseconds.
- linux,keymap: The keymap for keys as described in the binding
document (devicetree/bindings/input/matrix-keymap.txt).
Optional properties:
- linux,no-autorepeat: Disable keyrepeat.
- default-brightness-level: Initial brightness level [0-15] (default: 15).
Example:
&i2c1 {
ht16k33: ht16k33@70 {
compatible = “holtek,ht16k33”;
reg = <0x70>;
refresh-rate-hz = <20>;
debounce-delay-ms = <50>;
interrupt-parent = <&gpio4>;
interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
linux,keymap = <
MATRIX_KEY(2, 0, KEY_F6)
MATRIX_KEY(3, 0, KEY_F8)
MATRIX_KEY(4, 0, KEY_F10)
MATRIX_KEY(5, 0, KEY_F4)
MATRIX_KEY(6, 0, KEY_F2)
MATRIX_KEY(2, 1, KEY_F5)
MATRIX_KEY(3, 1, KEY_F7)
MATRIX_KEY(4, 1, KEY_F9)
MATRIX_KEY(5, 1, KEY_F3)
MATRIX_KEY(6, 1, KEY_F1)
>;
};
};
