Kernel-4.18.0-80.el8_gpu

Qualcomm adreno/snapdragon GPU

Required properties:

• compatible: “qcom,adreno-XYZ.W”, “qcom,adreno”
  for example: “qcom,adreno-306.0”, “qcom,adreno”
  Note that you need to list the less specific “qcom,adreno” (since this
  is what the device is matched on), in addition to the more specific
  with the chip-id.
• reg: Physical base address and length of the controller’s registers.
• interrupts: The interrupt signal from the gpu.
• clocks: device clocks
  See ../clocks/clock-bindings.txt for details.
• clock-names: the following clocks are required:
  • “core”
  • “iface”
  • “mem_iface”

Example:

/ {
…

gpu: qcom,kgsl-3d0@4300000 {
    compatible = "qcom,adreno-320.2", "qcom,adreno";
    reg = <0x04300000 0x20000>;
    reg-names = "kgsl_3d0_reg_memory";
    interrupts = <GIC_SPI 80 0>;
    interrupt-names = "kgsl_3d0_irq";
    clock-names =
        "core",
        "iface",
        "mem_iface";
    clocks =
        <&mmcc GFX3D_CLK>,
        <&mmcc GFX3D_AHB_CLK>,
        <&mmcc MMSS_IMEM_AHB_CLK>;
};

};