- Cadence PCIe host controller
This PCIe controller inherits the base properties defined in
host-generic-pci.txt.
Required properties:
- compatible: Should contain “cdns,cdns-pcie-host” to identify the IP used.
- reg: Should contain the controller register base address, PCIe configuration
window base address, and AXI interface region base address respectively. - reg-names: Must be “reg”, “cfg” and “mem” respectively.
- #address-cells: Set to <3>
- #size-cells: Set to <2>
- device_type: Set to “pci”
- ranges: Ranges for the PCI memory and I/O regions
- #interrupt-cells: Set to <1>
- interrupt-map-mask and interrupt-map: Standard PCI properties to define the
mapping of the PCIe interface to interrupt numbers.
Optional properties:
- cdns,max-outbound-regions: Set to maximum number of outbound regions
(default 32) - cdns,no-bar-match-nbits: Set into the no BAR match register to configure the
number of least significant bits kept during inbound (PCIe -> AXI) address
translations (default 32) - vendor-id: The PCI vendor ID (16 bits, default is design dependent)
- device-id: The PCI device ID (16 bits, default is design dependent)
Example:
pcie@fb000000 {
compatible = “cdns,cdns-pcie-host”;
device_type = “pci”;
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0xff>;
linux,pci-domain = <0>;
cdns,max-outbound-regions = <16>;
cdns,no-bar-match-nbits = <32>;
vendor-id = /bits/ 16 <0x17cd>;
device-id = /bits/ 16 <0x0200>;
reg = <0x0 0xfb000000 0x0 0x01000000>,
<0x0 0x41000000 0x0 0x00001000>,
<0x0 0x40000000 0x0 0x04000000>;
reg-names = "reg", "cfg", "mem";
ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
<0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
#interrupt-cells = <0x1>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
msi-parent = <&its_pci>;
};