Kernel-4.18.0-80.el8_brcm,bcm-v3

Broadcom V3D GPU

Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
For V3D 2.x, see brcm,bcm-vc4.txt.

Required properties:

• compatible: Should be “brcm,7268-v3d” or “brcm,7278-v3d”
• reg: Physical base addresses and lengths of the register areas
• reg-names: Names for the register areas. The “hub”, “bridge”, and “core0”

      register areas are always required.  The "gca" register area
      is required if the GCA cache controller is present.
  

• interrupts: The interrupt numbers. The first interrupt is for the hub,

      while the following interrupts are for the cores.
      See bindings/interrupt-controller/interrupts.txt
  

Optional properties:

• clocks: The core clock the unit runs on

v3d {
compatible = “brcm,7268-v3d”;
reg = <0xf1204000 0x100>,
<0xf1200000 0x4000>,
<0xf1208000 0x4000>,
<0xf1204100 0x100>;
reg-names = “bridge”, “hub”, “core0”, “gca”;
interrupts = <0 78 4>,
<0 77 4>;
};