Annapurna Labs Alpine Platform Device Tree Bindings
Boards in the Alpine family shall have the following properties:
Required root node properties:
compatible: must contain “al,alpine”Example:
/ {
model = “Annapurna Labs Alpine Dev Board”;
compatible = “al,alpine”;
...
}
- CPU node:
The Alpine platform includes cortex-a15 cores.
enable-method: must be “al,alpine-smp” to allow smp [1]
Example:
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = “al,alpine-smp”;
cpu@0 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <3>;
};
};
- Alpine CPU resume registers
The CPU resume register are used to define required resume address after
reset.
Properties:
- compatible : Should contain “al,alpine-cpu-resume”.
- reg : Offset and length of the register set for the device
Example:
cpu_resume {
compatible = “al,alpine-cpu-resume”;
reg = <0xfbff5ed0 0x30>;
};
- Alpine System-Fabric Service Registers
The System-Fabric Service Registers allow various operation on CPU and
system fabric, like powering CPUs off.
Properties:
- compatible : Should contain “al,alpine-sysfabric-service” and “syscon”.
- reg : Offset and length of the register set for the device
Example:
nb_service {
compatible = “al,alpine-sysfabric-service”, “syscon”;
reg = <0xfb070000 0x10000>;
};
[1] arm/cpu-enable-method/al,alpine-smp
