Kernel-3.10.0-957.el7_ssd1307fb

• Solomon SSD1307 Framebuffer Driver

Required properties:

• compatible: Should be “solomon,ssd1307fb-“. The only supported bus for
  now is i2c.
• reg: Should contain address of the controller on the I2C bus. Most likely

   0x3c or 0x3d
  

• pwm: Should contain the pwm to use according to the OF device tree PWM

   specification [0]
  

• reset-gpios: Should contain the GPIO used to reset the OLED display

Optional properties:

• reset-active-low: Is the reset gpio is active on physical low?

Examples:
ssd1307: oled@3c {
compatible = “solomon,ssd1307fb-i2c”;
reg = <0x3c>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>;
reset-active-low;
};