Kernel-3.10.0-957.el7_srio

• Freescale Serial RapidIO (SRIO) Controller

RapidIO port node:
Properties:

• compatible
  Usage: required
  Value type:
  Definition: Must include “fsl,srio” for IP blocks with IP Block
  Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.

  Optionally, a compatible string of “fsl,srio-vX.Y” where X is Major
  version in IP Block Revision Register and Y is Minor version. If this
  compatible is provided it should be ordered before “fsl,srio”.

• reg
  Usage: required
  Value type:
  Definition: A standard property. Specifies the physical address and
  length of the SRIO configuration registers. The size should
  be set to 0x11000.

• interrupts
  Usage: required
  Value type:
  Definition: Specifies the interrupts generated by this device. The
  value of the interrupts property consists of one interrupt
  specifier. The format of the specifier is defined by the
  binding document describing the node’s interrupt parent.

  A single IRQ that handles error conditions is specified by this
  property. (Typically shared with port-write).

• fsl,srio-rmu-handle:
  Usage: required if rmu node is defined
  Value type:
  Definition: A single value that points to the RMU.
  (See srio-rmu.txt for more details on RMU node binding)

Port Child Nodes: There should a port child node for each port that exists in
the controller. The ports are numbered starting at one (1) and should have
the following properties:

• cell-index
  Usage: required
  Value type:
  Definition: A standard property. Matches the port id.

• ranges
  Usage: required if local access windows preset
  Value type:
  Definition: A standard property. Utilized to describe the memory mapped
  IO space utilized by the controller. This corresponds to the
  setting of the local access windows that are targeted to this
  SRIO port.

• fsl,liodn
  Usage: optional-but-recommended (for devices with PAMU)
  Value type:
  Definition: The logical I/O device number for the PAMU (IOMMU) to be
  correctly configured for SRIO accesses. The property should
  not exist on devices that do not support PAMU.

  For HW (ie, the P4080) that only supports a LIODN for both
  memory and maintenance transactions then a single LIODN is
  represented in the property for both transactions.

  For HW (ie, the P304x/P5020, etc) that supports an LIODN for
  memory transactions and a unique LIODN for maintenance
  transactions then a pair of LIODNs are represented in the
  property. Within the pair, the first element represents the
  LIODN associated with memory transactions and the second element
  represents the LIODN associated with maintenance transactions
  for the port.

Note: All other standard properties (see ePAPR) are allowed but are optional.

Example:

rapidio: rapidio@ffe0c0000 {
    #address-cells = <2>;
    #size-cells = <2>;
    reg = <0xf 0xfe0c0000 0 0x11000>;
    compatible = "fsl,srio";
    interrupts = <16 2 1 11>; /* err_irq */
    fsl,srio-rmu-handle = <&rmu>;
    ranges;

    port1 {
        cell-index = <1>;
        #address-cells = <2>;
        #size-cells = <2>;
        fsl,liodn = <34>;
        ranges = <0 0 0xc 0x20000000 0 0x10000000>;
    };

    port2 {
        cell-index = <2>;
        #address-cells = <2>;
        #size-cells = <2>;
        fsl,liodn = <48>;
        ranges = <0 0 0xc 0x30000000 0 0x10000000>;
    };
};