Kernel-3.10.0-957.el7_mc13xxx

• Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)

Required properties:

• compatible : Should be “fsl,mc13783” or “fsl,mc13892”

Optional properties:

• fsl,mc13xxx-uses-adc : Indicate the ADC is being used
• fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
• fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
• fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used

Sub-nodes:

• regulators : Contain the regulator nodes. The regulators are bound using
  their names as listed below with their registers and bits for enabling.

MC13783 regulators:
sw1a : regulator SW1A (register 24, bit 0)
sw1b : regulator SW1B (register 25, bit 0)
sw2a : regulator SW2A (register 26, bit 0)
sw2b : regulator SW2B (register 27, bit 0)
sw3 : regulator SW3 (register 29, bit 20)
vaudio : regulator VAUDIO (register 32, bit 0)
viohi : regulator VIOHI (register 32, bit 3)
violo : regulator VIOLO (register 32, bit 6)
vdig : regulator VDIG (register 32, bit 9)
vgen : regulator VGEN (register 32, bit 12)
vrfdig : regulator VRFDIG (register 32, bit 15)
vrfref : regulator VRFREF (register 32, bit 18)
vrfcp : regulator VRFCP (register 32, bit 21)
vsim : regulator VSIM (register 33, bit 0)
vesim : regulator VESIM (register 33, bit 3)
vcam : regulator VCAM (register 33, bit 6)
vrfbg : regulator VRFBG (register 33, bit 9)
vvib : regulator VVIB (register 33, bit 11)
vrf1 : regulator VRF1 (register 33, bit 12)
vrf2 : regulator VRF2 (register 33, bit 15)
vmmc1 : regulator VMMC1 (register 33, bit 18)
vmmc2 : regulator VMMC2 (register 33, bit 21)
gpo1 : regulator GPO1 (register 34, bit 6)
gpo2 : regulator GPO2 (register 34, bit 8)
gpo3 : regulator GPO3 (register 34, bit 10)
gpo4 : regulator GPO4 (register 34, bit 12)
pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
pwgt2spi : regulator PWGT2SPI (register 34, bit 16)

MC13892 regulators:
vcoincell : regulator VCOINCELL (register 13, bit 23)
sw1 : regulator SW1 (register 24, bit 0)
sw2 : regulator SW2 (register 25, bit 0)
sw3 : regulator SW3 (register 26, bit 0)
sw4 : regulator SW4 (register 27, bit 0)
swbst : regulator SWBST (register 29, bit 20)
vgen1 : regulator VGEN1 (register 32, bit 0)
viohi : regulator VIOHI (register 32, bit 3)
vdig : regulator VDIG (register 32, bit 9)
vgen2 : regulator VGEN2 (register 32, bit 12)
vpll : regulator VPLL (register 32, bit 15)
vusb2 : regulator VUSB2 (register 32, bit 18)
vgen3 : regulator VGEN3 (register 33, bit 0)
vcam : regulator VCAM (register 33, bit 6)
vvideo : regulator VVIDEO (register 33, bit 12)
vaudio : regulator VAUDIO (register 33, bit 15)
vsd : regulator VSD (register 33, bit 18)
gpo1 : regulator GPO1 (register 34, bit 6)
gpo2 : regulator GPO2 (register 34, bit 8)
gpo3 : regulator GPO3 (register 34, bit 10)
gpo4 : regulator GPO4 (register 34, bit 12)
pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
vusb : regulator VUSB (register 50, bit 3)

The bindings details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt

Examples:

ecspi@70010000 { /* ECSPI1 /
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, / GPIO4_24 /
<&gpio4 25 0>; / GPIO4_25 */
status = “okay”;

pmic: mc13892@0 {
    #address-cells = <1>;
    #size-cells = <0>;
    compatible = "fsl,mc13892";
    spi-max-frequency = <6000000>;
    reg = <0>;
    interrupt-parent = <&gpio0>;
    interrupts = <8>;

    regulators {
        sw1_reg: mc13892__sw1 {
            regulator-min-microvolt = <600000>;
            regulator-max-microvolt = <1375000>;
            regulator-boot-on;
            regulator-always-on;
        };

        sw2_reg: mc13892__sw2 {
            regulator-min-microvolt = <900000>;
            regulator-max-microvolt = <1850000>;
            regulator-boot-on;
            regulator-always-on;
        };
    };
};

};