IPMI device
Required properties:
- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
- device_type: should be ipmi
- reg: Address and length of the register set for the device
Optional properties:
- interrupts: The interrupt for the device. Without this the interface
is polled. - reg-size - The size of the register. Defaults to 1
- reg-spacing - The number of bytes between register starts. Defaults to 1
- reg-shift - The amount to shift the registers to the right to get the data
into bit zero.
Example:
smic@fff3a000 {
compatible = “ipmi-smic”;
device_type = “ipmi”;
reg = <0xfff3a000 0x1000>;
interrupts = <0 24 4>;
reg-size = <4>;
reg-spacing = <4>;
};
