- Clock bindings for Freescale i.MX27
Required properties:
- compatible: Should be “fsl,imx27-ccm”
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its “clocks” phandle cell. The following is a full list of i.MX27
clocks and IDs.
Clock ID
-----------------------
dummy 0
ckih 1
ckil 2
mpll 3
spll 4
mpll_main2 5
ahb 6
ipg 7
nfc_div 8
per1_div 9
per2_div 10
per3_div 11
per4_div 12
vpu_sel 13
vpu_div 14
usb_div 15
cpu_sel 16
clko_sel 17
cpu_div 18
clko_div 19
ssi1_sel 20
ssi2_sel 21
ssi1_div 22
ssi2_div 23
clko_en 24
ssi2_ipg_gate 25
ssi1_ipg_gate 26
slcdc_ipg_gate 27
sdhc3_ipg_gate 28
sdhc2_ipg_gate 29
sdhc1_ipg_gate 30
scc_ipg_gate 31
sahara_ipg_gate 32
rtc_ipg_gate 33
pwm_ipg_gate 34
owire_ipg_gate 35
lcdc_ipg_gate 36
kpp_ipg_gate 37
iim_ipg_gate 38
i2c2_ipg_gate 39
i2c1_ipg_gate 40
gpt6_ipg_gate 41
gpt5_ipg_gate 42
gpt4_ipg_gate 43
gpt3_ipg_gate 44
gpt2_ipg_gate 45
gpt1_ipg_gate 46
gpio_ipg_gate 47
fec_ipg_gate 48
emma_ipg_gate 49
dma_ipg_gate 50
cspi3_ipg_gate 51
cspi2_ipg_gate 52
cspi1_ipg_gate 53
nfc_baud_gate 54
ssi2_baud_gate 55
ssi1_baud_gate 56
vpu_baud_gate 57
per4_gate 58
per3_gate 59
per2_gate 60
per1_gate 61
usb_ahb_gate 62
slcdc_ahb_gate 63
sahara_ahb_gate 64
lcdc_ahb_gate 65
vpu_ahb_gate 66
fec_ahb_gate 67
emma_ahb_gate 68
emi_ahb_gate 69
dma_ahb_gate 70
csi_ahb_gate 71
brom_ahb_gate 72
ata_ahb_gate 73
wdog_ipg_gate 74
usb_ipg_gate 75
uart6_ipg_gate 76
uart5_ipg_gate 77
uart4_ipg_gate 78
uart3_ipg_gate 79
uart2_ipg_gate 80
uart1_ipg_gate 81
ckih_div1p5 82
fpm 83
mpll_osc_sel 84
mpll_sel 85
Examples:
clks: ccm@10027000{
compatible = “fsl,imx27-ccm”;
reg = <0x10027000 0x1000>;
#clock-cells = <1>;
};
uart1: serial@1000a000 {
compatible = “fsl,imx27-uart”, “fsl,imx21-uart”;
reg = <0x1000a000 0x1000>;
interrupts = <20>;
clocks = <&clks 81>, <&clks 61>;
clock-names = “ipg”, “per”;
status = “disabled”;
};
