Kernel-3.10.0-957.el7_NinjaSCSI

     WorkBiT NinjaSCSI-3/32Bi driver for Linux

1. Comment
   This is Workbit corp.’s(http://www.workbit.co.jp/) NinjaSCSI-3
   for Linux.

2. My Linux environment
   Linux kernel: 2.4.7 / 2.2.19
   pcmcia-cs: 3.1.27
   gcc: gcc-2.95.4
   PC card: I-O data PCSC-F (NinjaSCSI-3)

          I-O data CBSC-II in 16 bit mode (NinjaSCSI-32Bi)
   

   SCSI device: I-O data CDPS-PX24 (CD-ROM drive)

          Media Intelligent MMO-640GT (Optical disk drive)
   

3. Install
   [1] Check your PC card is true “NinjaSCSI-3” card.
   If you installed pcmcia-cs already, pcmcia reports your card as UNKNOWN
   card, and write [“WBT”, “NinjaSCSI-3”, “R1.0”] or some other string to
   your console or log file.
   You can also use “cardctl” program (this program is in pcmcia-cs source
   code) to get more info.

cat /var/log/messages

…
Jan 2 03:45:06 lindberg cardmgr[78]: unsupported card in socket 1
Jan 2 03:45:06 lindberg cardmgr[78]: product info: “WBT”, “NinjaSCSI-3”, “R1.0”
…

cardctl ident

Socket 0:
no product info available
Socket 1:
product info: “IO DATA”, “CBSC16 “, “1”

[2] Get the Linux kernel source, and extract it to /usr/src.
Because the NinjaSCSI driver requires some SCSI header files in Linux
kernel source, I recommend rebuilding your kernel; this eliminates
some versioning problems.
$ cd /usr/src
$ tar -zxvf linux-x.x.x.tar.gz
$ cd linux
$ make config
…

[3] If you use this driver with Kernel 2.2, unpack pcmcia-cs in some directory
and make & install. This driver requires the pcmcia-cs header file.
$ cd /usr/src
$ tar zxvf cs-pcmcia-cs-3.x.x.tar.gz
…

[4] Extract this driver’s archive somewhere, and edit Makefile, then do make.
$ tar -zxvf nsp_cs-x.x.tar.gz
$ cd nsp_cs-x.x
$ emacs Makefile
…
$ make

[5] Copy nsp_cs.ko to suitable place, like /lib/modules//pcmcia/ .

[6] Add these lines to /etc/pcmcia/config .
If you use pcmcia-cs-3.1.8 or later, we can use “nsp_cs.conf” file.
So, you don’t need to edit file. Just copy to /etc/pcmcia/ .

---

device “nsp_cs”
class “scsi” module “nsp_cs”

card “WorkBit NinjaSCSI-3”
version “WBT”, “NinjaSCSI-3”, “R1.0”
bind “nsp_cs”

card “WorkBit NinjaSCSI-32Bi (16bit)”
version “WORKBIT”, “UltraNinja-16”, “1”
bind “nsp_cs”

OEM

card “WorkBit NinjaSCSI-32Bi (16bit) / IO-DATA”
version “IO DATA”, “CBSC16 “, “1”
bind “nsp_cs”

OEM

card “WorkBit NinjaSCSI-32Bi (16bit) / KME-1”
version “KME “, “SCSI-CARD-001”, “1”
bind “nsp_cs”
card “WorkBit NinjaSCSI-32Bi (16bit) / KME-2”
version “KME “, “SCSI-CARD-002”, “1”
bind “nsp_cs”
card “WorkBit NinjaSCSI-32Bi (16bit) / KME-3”
version “KME “, “SCSI-CARD-003”, “1”
bind “nsp_cs”
card “WorkBit NinjaSCSI-32Bi (16bit) / KME-4”
version “KME “, “SCSI-CARD-004”, “1”
bind “nsp_cs”

---

[7] Start (or restart) pcmcia-cs.

/etc/rc.d/rc.pcmcia start (BSD style)

or

/etc/init.d/pcmcia start (SYSV style)

4. History
   See README.nin_cs .

5. Caution
   If you eject card when doing some operation for your SCSI device or suspend
   your computer, you encount some BAD error like disk crash.
   It works good when I using this driver right way. But I’m not guarantee
   your data. Please backup your data when you use this driver.

6. Known Bugs
   In 2.4 kernel, you can’t use 640MB Optical disk. This error comes from
   high level SCSI driver.

7. Testing
   Please send me some reports(bug reports etc..) of this software.
   When you send report, please tell me these or more.
   card name
   kernel version
   your SCSI device name(hard drive, CD-ROM, etc…)

8. Copyright
   See GPL.

2001/08/08 yokota@netlab.is.tsukuba.ac.jp