Kernel-2.6.32-573.12.1.el6_ac

published: updated: Kernel_2.6.32-573.12.1.el6_内核文档 
          Linux ACM driver v0.16
     (c) 1999 Vojtech Pavlik <vojtech@suse.cz>
             Sponsored by SuSE

  1. Disclaimer

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
      This program is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by the Free
    Software Foundation; either version 2 of the License, or (at your option)
    any later version.

      This program is distributed in the hope that it will be useful, but
    WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
    more details.

      You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, Inc., 59
    Temple Place, Suite 330, Boston, MA 02111-1307 USA

      Should you need to contact me, the author, you can do so either by e-mail
    - mail your message to <vojtech@suse.cz>, or by paper mail: Vojtech Pavlik,
    Ucitelska 1576, Prague 8, 182 00 Czech Republic

      For your convenience, the GNU General Public License version 2 is included
    in the package: See the file COPYING.

    1. Usage

    The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal
    adapters that conform to the Universal Serial Bus Communication Device Class
    Abstract Control Model (USB CDC ACM) specification.

    Many modems do, here is a list of those I know of:

    3Com OfficeConnect 56k
    3Com Voice FaxModem Pro
    3Com Sportster
    MultiTech MultiModem 56k
    Zoom 2986L FaxModem
    Compaq 56k FaxModem
    ELSA Microlink 56k

    I know of one ISDN TA that does work with the acm driver:

    3Com USR ISDN Pro TA

    Some cell phones also connect via USB. I know the following phones work:

    SonyEricsson K800i

    Unfortunately many modems and most ISDN TAs use proprietary interfaces and
    thus won’t work with this drivers. Check for ACM compliance before buying.

    To use the modems you need these modules loaded:

    usbcore.ko
    uhci-hcd.ko ohci-hcd.ko or ehci-hcd.ko
    cdc-acm.ko

    After that, the modem[s] should be accessible. You should be able to use
    minicom, ppp and mgetty with them.

  2. Verifying that it works

    The first step would be to check /proc/bus/usb/devices, it should look
like this:

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=6800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
P: Vendor=04c1 ProdID=008f Rev= 2.07
S: Manufacturer=3Com Inc.
S: Product=3Com U.S. Robotics Pro ISDN TA
S: SerialNumber=UFT53A49BVT7
C: #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
C:* #Ifs= 2 Cfg#= 2 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms

The presence of these three lines (and the Cls= ‘comm’ and ‘data’ classes)
is important, it means it’s an ACM device. The Driver=acm means the acm
driver is used for the device. If you see only Cls=ff(vend.) then you’re out
of luck, you have a device with vendor specific-interface.

D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm

In the system log you should see:

usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF c7691fa0, numif 1
usb.c: kmalloc IF c7b5f3e0, numif 2
usb.c: skipped 4 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: 3Com Inc.
Product: 3Com U.S. Robotics Pro ISDN TA
SerialNumber: UFT53A49BVT7
acm.c: probing config 1
acm.c: probing config 2
ttyACM0: USB ACM device
acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0
acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7
usb.c: acm driver claimed interface c7b5f3e0
usb.c: acm driver claimed interface c7b5f3f8
usb.c: acm driver claimed interface c7691fa0

If all this seems to be OK, fire up minicom and set it to talk to the ttyACM
device and try typing ‘at’. If it responds with ‘OK’, then everything is
working.

oosTech by Sam Lee