Kernel-4.18.0-80.el8_pwm-stm32

STMicroelectronics STM32 Timers PWM bindings

Must be a sub-node of an STM32 Timers device tree node.
See ../mfd/stm32-timers.txt for details about the parent node.

Required parameters:

• compatible: Must be “st,stm32-pwm”.
• pinctrl-names: Set to “default”.
• pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.

        For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
  

Optional parameters:

• st,breakinput: One or two to describe break input configurations.

        "index" indicates on which break input (0 or 1) the configuration
        should be applied.
        "level" gives the active level (0=low or 1=high) of the input signal
        for this configuration.
        "filter" gives the filtering value to be applied.
  

Example:
timers@40010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = “st,stm32-timers”;
reg = <0x40010000 0x400>;
clocks = <&rcc 0 160>;
clock-names = “int”;

    pwm {
        compatible = "st,stm32-pwm";
        pinctrl-0    = <&pwm1_pins>;
        pinctrl-names    = "default";
        st,breakinput = <0 1 5>;
    };
};