Kernel-4.18.0-80.el8_nvidia,tegra114-mipi

NVIDIA Tegra MIPI pad calibration controller

Required properties:

• compatible: “nvidia,tegra-mipi”
• reg: Physical base address and length of the controller’s registers.
• clocks: Must contain an entry for each entry in clock-names.
  See ../clocks/clock-bindings.txt for details.
• clock-names: Must include the following entries:
  • mipi-cal
• #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
  that need to be calibrated for a given device.

User nodes need to contain an nvidia,mipi-calibrate property that has a
phandle to refer to the calibration controller node and a bitmask of the pads
that need to be calibrated.

Example:

mipi: mipi@700e3000 {
    compatible = "nvidia,tegra114-mipi";
    reg = <0x700e3000 0x100>;
    clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
    clock-names = "mipi-cal";
    #nvidia,mipi-calibrate-cells = <1>;
};

...

host1x@50000000 {
    ...

    dsi@54300000 {
        ...

        nvidia,mipi-calibrate = <&mipi 0x060>;

        ...
    };

    ...
};