Kernel-4.18.0-80.el8_marvell,pxa2xx-lcdc

PXA LCD Controller

Required properties:

• compatible : one of these
  “marvell,pxa2xx-lcdc”,
  “marvell,pxa270-lcdc”,
  “marvell,pxa300-lcdc”
• reg : should contain 1 register range (address and length).
• interrupts : framebuffer controller interrupt.
• clocks: phandle to input clocks

Required nodes:

• port: connection to the LCD panel (see video-interfaces.txt)
  This node must have its properties bus-width and remote-endpoint set.
  If the panel is not a TFT color panel, then a “lcd-type” property in
  the panel should specify the panel type.
  This panel node should be in the board dts.

Example:
lcd-controller@40500000 {
compatible = “marvell,pxa2xx-lcdc”;
reg = <0x44000000 0x10000>;
interrupts = <17>;
clocks = <&clks CLK_LCD>;

    port {
        lcdc_out: endpoint {
            remote-endpoint = <&panel_in>;
            bus-width = <16>;
        };
    };
};