Kernel-4.18.0-80.el8_jdi,lt070me05000

JDI model LT070ME05000 1200x1920 7” DSI Panel

Required properties:

• compatible: should be “jdi,lt070me05000”
• vddp-supply: phandle of the regulator that provides the supply voltage
  Power IC supply (3-5V)
• iovcc-supply: phandle of the regulator that provides the supply voltage
  IOVCC , power supply for LCM (1.8V)
• enable-gpios: phandle of gpio for enable line
  LED_EN, LED backlight enable, High active
• reset-gpios: phandle of gpio for reset line
  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
  XRES, Reset, Low active
• dcdc-en-gpios: phandle of the gpio for power ic line
  Power IC supply enable, High active

Example:

dsi0: qcom,mdss_dsi@4700000 {
    panel@0 {
        compatible = "jdi,lt070me05000";
        reg = <0>;

        vddp-supply = <&pm8921_l17>;
        iovcc-supply = <&pm8921_lvs7>;

        enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
        reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
        dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
    };
};