Kernel-4.18.0-80.el8_imx6q-clock

  • Clock bindings for Freescale i.MX6 Quad

Required properties:

  • compatible: Should be “fsl,imx6q-ccm”
  • reg: Address and length of the register set
  • interrupts: Should contain CCM interrupt
  • #clock-cells: Should be <1>

The clock consumer should specify the desired clock by having the clock
ID in its “clocks” phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
for the full list of i.MX6 Quad and DualLite clock IDs.

Examples:

#include <dt-bindings/clock/imx6qdl-clock.h>

clks: ccm@20c4000 {
compatible = “fsl,imx6q-ccm”;
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
#clock-cells = <1>;
};

uart1: serial@2020000 {
compatible = “fsl,imx6q-uart”, “fsl,imx21-uart”;
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = “ipg”, “per”;
};