Kernel-4.18.0-80.el8_imx27-clock

• Clock bindings for Freescale i.MX27

Required properties:

• compatible: Should be “fsl,imx27-ccm”
• reg: Address and length of the register set
• interrupts: Should contain CCM interrupt
• #clock-cells: Should be <1>

The clock consumer should specify the desired clock by having the clock
ID in its “clocks” phandle cell. See include/dt-bindings/clock/imx27-clock.h
for the full list of i.MX27 clock IDs.

Examples:
clks: ccm@10027000{
compatible = “fsl,imx27-ccm”;
reg = <0x10027000 0x1000>;
#clock-cells = <1>;
};

uart1: serial@1000a000 {
    compatible = "fsl,imx27-uart", "fsl,imx21-uart";
    reg = <0x1000a000 0x1000>;
    interrupts = <20>;
    clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
         <&clks IMX27_CLK_PER1_GATE>;
    clock-names = "ipg", "per";
};