Kernel-4.18.0-80.el8_img,spdif-out

Imagination Technologies SPDIF Output Controller

Required Properties:

• compatible : Compatible list, must contain “img,spdif-out”

• #sound-dai-cells : Must be equal to 0

• reg : Offset and length of the register set for the device

• dmas: Contains an entry for each entry in dma-names.

• dma-names: Must include the following entry:
  “tx”

• clocks : Contains an entry for each entry in clock-names.

• clock-names : Includes the following entries:
  “sys” The system clock
  “ref” The reference clock

• resets: Contains a phandle to the spdif out reset signal

• reset-names: Contains the reset signal name “rst”

Optional Properties:

• interrupts : Contains the parallel out interrupt, if present

Example:

spdif_out: spdif-out@18100d00 {
compatible = “img,spdif-out”;
reg = <0x18100D00 0x100>;
interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&mdc 14 0xffffffff 0>;
dma-names = “tx”;
clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
<&clk_core CLK_SPDIF>;
clock-names = “sys”, “ref”;
resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
reset-names = “rst”;
#sound-dai-cells = <0>;
};