Kernel-4.18.0-80.el8_gpio-clps711x

Cirrus Logic CLPS711X GPIO controller

Required properties:

• compatible: Should be “cirrus,ep7209-gpio”
• reg: Physical base GPIO controller registers location and length.
  There should be two registers, first is DATA register, the second
  is DIRECTION.
• gpio-controller: Marks the device node as a gpio controller.
• #gpio-cells: Should be two. The first cell is the pin number and
  the second cell is used to specify the gpio polarity:
  0 = active high
  1 = active low

Note: Each GPIO port should have an alias correctly numbered in “aliases”
node.

Example:

aliases {
gpio0 = &porta;
};

porta: gpio@80000000 {
compatible = “cirrus,ep7312-gpio”,”cirrus,ep7209-gpio”;
reg = <0x80000000 0x1>, <0x80000040 0x1>;
gpio-controller;
#gpio-cells = <2>;
};