Kernel-4.18.0-80.el8_dwmac-sun8i

  • Allwinner sun8i GMAC ethernet controller

This device is a platform glue layer for stmmac.
Please see stmmac.txt for the other unchanged properties.

Required properties:

  • compatible: must be one of the following string:
      "allwinner,sun8i-a83t-emac"
      "allwinner,sun8i-h3-emac"
      "allwinner,sun8i-r40-gmac"
      "allwinner,sun8i-v3s-emac"
      "allwinner,sun50i-a64-emac"
    
  • reg: address and length of the register for the device.
  • interrupts: interrupt for the device
  • interrupt-names: must be “macirq”
  • clocks: A phandle to the reference clock for this device
  • clock-names: must be “stmmaceth”
  • resets: A phandle to the reset control for this device
  • reset-names: must be “stmmaceth”
  • phy-mode: See ethernet.txt
  • phy-handle: See ethernet.txt
  • #address-cells: shall be 1
  • #size-cells: shall be 0
  • syscon: A phandle to the device containing the EMAC or GMAC clock register

Optional properties:

  • allwinner,tx-delay-ps: TX clock delay chain value in ps.
           Range is 0-700. Default is 0.
           Unavailable for allwinner,sun8i-r40-gmac
    
  • allwinner,rx-delay-ps: RX clock delay chain value in ps.
           Range is 0-3100. Default is 0.
           Range is 0-700 for allwinner,sun8i-r40-gmac
    
    Both delay properties need to be a multiple of 100. They control the
    clock delay for external RGMII PHY. They do not apply to the internal
    PHY or external non-RGMII PHYs.

Optional properties for the following compatibles:

  • “allwinner,sun8i-h3-emac”,
  • “allwinner,sun8i-v3s-emac”:
  • allwinner,leds-active-low: EPHY LEDs are active low

Required child node of emac:

  • mdio bus node: should be named mdio with compatible “snps,dwmac-mdio”

Required properties of the mdio node:

  • #address-cells: shall be 1
  • #size-cells: shall be 0

The device node referenced by “phy” or “phy-handle” must be a child node
of the mdio node. See phy.txt for the generic PHY bindings.

The following compatibles require that the emac node have a mdio-mux child
node called “mdio-mux”:

  • “allwinner,sun8i-h3-emac”
  • “allwinner,sun8i-v3s-emac”:
    Required properties for the mdio-mux node:
  • compatible = “allwinner,sun8i-h3-mdio-mux”
  • mdio-parent-bus: a phandle to EMAC mdio
  • one child mdio for the integrated mdio with the compatible
    “allwinner,sun8i-h3-mdio-internal”
  • one child mdio for the external mdio if present (V3s have none)
    Required properties for the mdio-mux children node:
  • reg: 1 for internal MDIO bus, 2 for external MDIO bus

The following compatibles require a PHY node representing the integrated
PHY, under the integrated MDIO bus node if an mdio-mux node is used:

  • “allwinner,sun8i-h3-emac”,
  • “allwinner,sun8i-v3s-emac”:

Additional information regarding generic multiplexer properties can be found
at Documentation/devicetree/bindings/net/mdio-mux.txt

Required properties of the integrated phy node:

  • clocks: a phandle to the reference clock for the EPHY
  • resets: a phandle to the reset control for the EPHY
  • Must be a child of the integrated mdio

Example with integrated PHY:
emac: ethernet@1c0b000 {
compatible = “allwinner,sun8i-h3-emac”;
syscon = <&syscon>;
reg = <0x01c0b000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = “macirq”;
resets = <&ccu RST_BUS_EMAC>;
reset-names = “stmmaceth”;
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = “stmmaceth”;
#address-cells = <1>;
#size-cells = <0>;

phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;

mdio: mdio {
    #address-cells = <1>;
    #size-cells = <0>;
    compatible = "snps,dwmac-mdio";
};

mdio-mux {
    compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";
    #address-cells = <1>;
    #size-cells = <0>;

    mdio-parent-bus = <&mdio>;

    int_mdio: mdio@1 {
        compatible = "allwinner,sun8i-h3-mdio-internal";
        reg = <1>;
        #address-cells = <1>;
        #size-cells = <0>;
        int_mii_phy: ethernet-phy@1 {
            reg = <1>;
            clocks = <&ccu CLK_BUS_EPHY>;
            resets = <&ccu RST_BUS_EPHY>;
            phy-is-integrated;
        };
    };
    ext_mdio: mdio@2 {
        reg = <2>;
        #address-cells = <1>;
        #size-cells = <0>;
    };
};

};

Example with external PHY:
emac: ethernet@1c0b000 {
compatible = “allwinner,sun8i-h3-emac”;
syscon = <&syscon>;
reg = <0x01c0b000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = “macirq”;
resets = <&ccu RST_BUS_EMAC>;
reset-names = “stmmaceth”;
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = “stmmaceth”;
#address-cells = <1>;
#size-cells = <0>;

phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
allwinner,leds-active-low;

mdio: mdio {
    #address-cells = <1>;
    #size-cells = <0>;
    compatible = "snps,dwmac-mdio";
};

mdio-mux {
    compatible = "allwinner,sun8i-h3-mdio-mux";
    #address-cells = <1>;
    #size-cells = <0>;

    mdio-parent-bus = <&mdio>;

    int_mdio: mdio@1 {
        compatible = "allwinner,sun8i-h3-mdio-internal";
        reg = <1>;
        #address-cells = <1>;
        #size-cells = <0>;
        int_mii_phy: ethernet-phy@1 {
            reg = <1>;
            clocks = <&ccu CLK_BUS_EPHY>;
            resets = <&ccu RST_BUS_EPHY>;
        };
    };
    ext_mdio: mdio@2 {
        reg = <2>;
        #address-cells = <1>;
        #size-cells = <0>;
        ext_rgmii_phy: ethernet-phy@1 {
            reg = <1>;
        };
    }:
};

};

Example with SoC without integrated PHY

emac: ethernet@1c0b000 {
compatible = “allwinner,sun8i-a83t-emac”;
syscon = <&syscon>;
reg = <0x01c0b000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = “macirq”;
resets = <&ccu RST_BUS_EMAC>;
reset-names = “stmmaceth”;
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = “stmmaceth”;
#address-cells = <1>;
#size-cells = <0>;

phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";

mdio: mdio {
    compatible = "snps,dwmac-mdio";
    #address-cells = <1>;
    #size-cells = <0>;
    ext_rgmii_phy: ethernet-phy@1 {
        reg = <1>;
    };
};

};