Kernel-4.18.0-80.el8_cpcap-charger

Motorola CPCAP PMIC battery charger binding

Required properties:

• compatible: Shall be “motorola,mapphone-cpcap-charger”
• interrupts: Interrupt specifier for each name in interrupt-names
• interrupt-names: Should contain the following entries:

       "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
       "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"
  

• io-channels: IIO ADC channel specifier for each name in io-channel-names
• io-channel-names: Should contain the following entries:

        "battdetb", "battp", "vbus", "chg_isense", "batti"
  

Optional properties:

• mode-gpios: Optionally CPCAP charger can have a companion wireless

      charge controller that is controlled with two GPIOs
      that are active low.
  

Example:

cpcap_charger: charger {
compatible = “motorola,mapphone-cpcap-charger”;
interrupts-extended = <
&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
>;
interrupt-names =
“chrg_det”, “rvrs_chrg”, “chrg_se1b”, “se0conn”,
“rvrs_mode”, “chrgcurr1”, “vbusvld”, “battdetb”;
mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
&gpio3 23 GPIO_ACTIVE_LOW>;
io-channels = <&cpcap_adc 0 &cpcap_adc 1
&cpcap_adc 2 &cpcap_adc 5
&cpcap_adc 6>;
io-channel-names = “battdetb”, “battp”,
“vbus”, “chg_isense”,
“batti”;
};