Kernel-4.18.0-80.el8_88pm800

Marvell 88PM800 regulator

Required properties:

• compatible: “marvell,88pm800”
• reg: I2C slave address
• regulators: A node that houses a sub-node for each regulator within the
  device. Each sub-node is identified using the node’s name (or the deprecated
  regulator-compatible property if present), with valid values listed below.
  The content of each sub-node is defined by the standard binding for
  regulators; see regulator.txt.

The valid names for regulators are:

buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19

Example:

pmic: 88pm800@31 {
    compatible = "marvell,88pm800";
    reg = <0x31>;

    regulators {
        buck1 {
                regulator-min-microvolt = <600000>;
                regulator-max-microvolt = <3950000>;
                regulator-boot-on;
                regulator-always-on;
        };
        ldo1 {
                regulator-min-microvolt = <600000>;
                regulator-max-microvolt = <15000000>;
                regulator-boot-on;
                regulator-always-on;
        };

…
};
};